Tower Systems | Rigging Towers | Ground Support

System characteristics
ProlyteStructures tower systems consist of four types of rigging towers and the MPT, ST and CT ground support truss systems. All truss tower systems are based on standard ProlyteStructures truss. Extending your inventory to encompass more complex systems (like towers or roofs) is a cost-efficient process, proceeding as a step-by-step investment. You only need to buy the additional parts, such as base or top sections to complement the truss to use them as tower truss. This approach offers extraordinary flexibility and facilitates optimum use of your existing trusses. 

Rigging towers
The rigging towers are designed as stand-alone towers to support PA clusters or audience lighting. Rigging towers are available in types ranging from 800 to 2300 kg in terms of allowable load, and from 7,60 m to 16 m in terms of lifting height. Rigging towers can be built on any even surface and are specially designed for outdoor use. 

Prolyte Rigging Towers

Ground support towers
The ground support towers are designed to support a grid without having the need for suspension points. They can be used in a goal post setup (two towers) or as ground support (three or more towers). The ground support towers are available in three types: the MPT Tower (to be used in combination with all trusses from the Multipurpose Series), the ST tower (to be used in combination with all the trusses from the Heavy-Duty Series), and the CT tower (to be used in combination with the B100RV and S100F truss). Ground support towers can be built on any even surface and are designed for indoor as well as outdoor use. 

Prolyte Ground Support Systems

Coupling system 
The RT-H30V, MPT and ST mast sections use the CCS6 system. The RT-36V, RT S52SV, RT- B100RV and CT mast section use the CSS7 system. The Conical Coupling System® allows fast, efficient and reliable coupling of your towers. 

The MPT tower is based on H30V truss and employs a sleeve block that fits to any of the 30 or 40 Series trusses on all four sides.
The ST tower is based on S40T mast sections and uses several sleeve blocks that combine all the trusses from the S and B Series.
The CT tower is based on C52T mast sections and uses several sleeve blocks that combine all the trusses from the S and B Series.
The light-duty RT H30V has a loading capacity of 800 kg and a maximum lifting height of 7,60 m.
The medium-duty RT S36V has a loading capacity of 1000 kg and a maximum lifting height of 9,25 m.
The medium-to-heavy-duty RT-S52SV has a loading capacity of 1400 to 2900 kg and a maximum lifting height of 12,95 m.
The heavy-duty RT-B100RV has a loading capacity of 2300 kg and a maximum lifting height of 15,95 m.

Being able to reduce building times dramatically is really an important issue for our company. We look forward receiving the first batch of Verto Truss!

Rene Verbruggen Bridge Event Facilities