H52V Square Truss Length

Catalog number: H52V-L100 - Item code: 111050230

H52V truss is constructed of main tubes (48,3 x 3 mm) and diagonals (25 x 3 mm). Equipped with the CCS6 conical coupling system, the H52V truss is fast and easy to assemble. The H52V truss offers extra strength and loading capacity, for those applications where longer spans or extra capacity is needed. H52V truss is available in square profiles, additional box corners and accessories.

Standard available lengths and codes
Metres	Feet	Weight (kg)	Weight (lbs)	Code	Item Number
0,50	1,64	7,40	16.31	H52V-L050	111050227
1,00	3,28	11,10	24.47	H52V-L100	111050230
1,50	4,92	15,90	35.05	H52V-L150	111050232
2,00	6,56	20,50	45.19	H52V-L200	111050234
2,50	8,20	23,60	52.03	H52V-L250	111050236
3,00	9,84	27,70	61.07	H52V-L300	111050237
3,50	11,48	29,70	65.48	H52V-L350	111050239
4,00	13,12	33,90	74.74	H52V-L400	111050240
Other Lengths available on request

Request a quote

Advantages

Fast and easy assembly
Extra strength and loading capacity
Suited for longer spans

Downloads

LOADING TABLE TRUSS TYPE H52V LENGTHS (PDF, 148KB)

You can create an account, so you don't have to fill in your email address for every download.

Email address*

To be able to download please submit your e-mail address. You allow Prolyte to contact you once by email

Both fields are required!

Need help?

Need advice about one of our products or services? Find out on our Prolyte Campus page or
Contact us

Technical specifications

Technical Specifications - H52 Series
Alloy	EN AW 6082 T6
Main Tubes	48,3 x 3 mm
Braces	25 x 3 mm
Coupling System	CCS6

Load all specifications

LOADING TABLE TRUSS TYPE H52V LENGTHS (PDF, 148KB)

You can create an account, so you don't have to fill in your email address for every download.

Email address*

To be able to download please submit your e-mail address. You allow Prolyte to contact you once by email

Both fields are required!

H52V - Allowable Loading

						MAXIMUM ALLOWABLE POINT LOADS
		Uniformly Distributed Load				Centre Point Load				Single Load Third Points Load per Point		Single Load Fourth Points Load per Point		Single Load Fifth Points Load per Point
SPAN		UDL		DEFLECTION		CPL		DEFLECTION		TPL		QPL		FPL		SPAN
m	ft	kg/m	lbs/ft	mm	inch	kgs	lbs	mm	inch	kgs	lbs	kgs	lbs	kgs	lbs	total weight
3	9,8	1523,9	1025,4	5	0,2	2630,9	5806,5	4	0,2	1746,0	3853,5	1381,4	3048,9	1142,9	2522,4	27
4	13,1	1140,7	767,5	9	0,4	2171,1	4791,6	7	0,3	1418,4	3130,5	1161,7	2563,9	980,1	2163,0	36
5	16,4	910,7	612,8	15	0,6	1845,7	4073,5	12	0,5	1224,3	2701,9	1023,5	2258,9	803,4	1773,1	45
6	19,7	690,3	464,5	21	0,8	1602,9	3537,6	17	0,7	1079,6	2382,7	903,5	1994,1	693,5	1530,6	54
7	23,0	504,8	339,6	29	1,1	1414,4	3121,6	23	0,9	964,3	2128,2	785,5	1733,6	609,2	1344,4	63
8	26,2	384,4	258,6	37	1,5	1263,5	2788,6	30	1,2	870,1	1920,3	693,5	1530,6	542,2	1196,6	72
9	29,5	301,8	203,1	47	1,9	1139,8	2515,6	38	1,5	791,5	1746,9	619,7	1367,7	487,7	1076,3	81
10	32,8	242,7	163,3	59	2,3	1036,4	2287,3	47	1,9	724,9	1599,9	559,0	1233,8	442,3	976,2	90
11	36,1	199,1	133,9	71	2,8	948,4	2093,1	57	2,2	667,6	1473,4	508,2	1121,6	404,0	891,6	99
12	39,4	165,8	111,6	84	3,3	872,5	1925,7	67	2,6	617,7	1363,2	464,9	1026,0	371,0	818,9	108
13	42,6	140,0	94,2	99	3,9	806,3	1779,6	79	3,1	573,8	1266,3	427,5	943,4	342,4	755,7	117
14	45,9	119,4	80,4	115	4,5	747,9	1650,7	92	3,6	534,8	1180,2	394,8	871,3	317,2	700,1	126
15	49,2	102,9	69,2	132	5,2	695,9	1535,9	105	4,1	499,8	1103,1	365,9	807,0	294,9	650,8	135
16	52,5	89,3	60,1	150	5,9	649,3	1433,0	120	4,7	468,3	1033,5	340,2	750,8	274,9	606,7	144
17	55,8	78,1	52,6	160	6,3	607,1	1339,9	135	5,3	439,6	970,2	317,1	699,8	256,5	566,0	153
18	59,0	68,7	46,2	190	7,5	568,7	1255,2	152	6,0	413,4	912,4	296,2	653,8	240,5	530,8	162
19	62,3	60,7	40,9	211	8,3	533,6	1177,6	169	6,7	389,3	859,3	277,2	611,8	225,6	497,8	171
20	65,6	53,9	36,3	234	9,2	501,2	1106,3	187	7,4	367,1	810,2	259,8	573,4	211,8	467,5	180
1 inch = 25,4 mm \| 1m = 3.28 ft \| 1 lbs = 0,453 kg

• Tüv certification only valid for loading table above.

• Loading figures are only valid for static loads.

• Loading figures are only valid for single spans with supports at both ends.

• All static systems, other than single spans, need an individual structural calculation. Please contact a structural engineer or
Prolyte Group for assistance.

• Loading figures are calculated according to and in full compliance with European standards (Eurocode).

• The self-weight of the trusses is already taken into account.

• Loading figures are only valid for the cross sectional orientation of the truss as shown by the icon in the loading table.

• The interaction between bending moment and shear force at the connection point is already taken into account.

• Truss spans can be assembled from different truss lengths.

• Read the manual before assembling, using and loading the truss.