Go Back

X30V Square Truss Length

Catalog number: X30V-L100
Item code: 111080133

X30 truss is constructed of main chords (51 x 2 mm) and diagonal members (16 x 2 mm). Equipped with the CCS6 conical coupling system, the X30 truss is fast and easy to assemble. The X30 truss can be found in rental fleets all over the globe, where its low volume and flexible application possibilities makes it the ideal truss for exhibitions and low intensity rental jobs. X30 truss is available in ladder, triangular and square profiles and a range of corners and accessories.

Download
X30V Square Truss product data sheet

Find a Local Dealer

Need help?

Need advice about one of our products or services? Find out on our Prolyte Campus page.

Technical Specification Advantages Downloads

Standard available lengths and codes
Metres	Feet	Weight (kg)	Weight (lbs)	Code	Item Number
0,25	0,82	2,70	5.95	X30V-L025	111080107
0,29	0,95	2,80	6.17	X30V-L029	111080108
0,50	1,64	3,80	8.38	X30V-L050	111080118
0,71	2,33	4,80	10.58	X30V-L071	111080123
0,75	2,46	4,90	10.80	X30V-L075	111080124
1,00	3,28	6,00	13.23	X30V-L100	111080133
1,50	4,92	8,30	18.30	X30V-L150	111080138
2,00	6,56	10,70	23.59	X30V-L200	111080144
2,50	8,20	12,80	28.22	X30V-L250	111080148
3,00	9,84	15,40	33.95	X30V-L300	111080151
4,00	13,12	20,00	44.09	X30V-L400	111080153
Other Lengths available on request

Technical Specifications - X30 Series
Alloy	EN AW 6082 T6
Main Chords	51 x 2 mm
Diagonal Members	16 x 2 mm
Coupling System	CCS6

X30V - Allowable Loading
						MAXIMUM ALLOWABLE POINT LOADS
		Uniformly Distributed Load				Centre Point Load				Single Load Third Points Load per Point		Single Load Fourth Points Load per Point		Single Load Fifth Points Load per Point
SPAN		UDL		DEFLECTION		CPL		DEFLECTION		TPL		QPL		FPL		SPAN
m	ft	kg/m	lbs/ft	mm	inch	kgs	lbs	mm	inch	kgs	lbs	kgs	lbs	kgs	lbs	total weight
3	9,8	650,0	437,4	10	0,4	1215,0	2681,5	8	0,3	853,5	1883,6	650,0	1434,6	487,5	1076,0	15,3
4	13,1	486,4	327,3	18	0,7	959,5	2117,5	15	0,6	664,0	1465,5	523,6	1155,5	411,2	907,5	20,4
5	16,4	367,1	247,0	28	1,1	791,1	1746,0	23	0,9	555,2	1225,4	424,9	937,7	337,3	744,5	25,5
6	19,7	253,5	170,6	41	1,6	671,5	1482,0	33	1,3	476,1	1050,8	356,6	787,1	285,4	629,8	30,6
7	23,0	185,1	124,5	55	2,2	581,9	1284,3	44	1,7	415,9	918,0	306,5	676,5	246,7	544,4	35,7
8	26,2	140,6	94,6	72	2,9	512,2	1130,4	58	2,3	368,5	813,2	268,1	591,6	216,7	478,3	40,8
9	29,5	110,1	74,1	92	3,6	456,2	1006,8	73	2,9	330,0	728,3	237,5	524,2	192,7	425,4	45,9
10	32,8	88,3	59,4	113	4,5	410,1	905,1	91	3,6	298,1	658,0	212,7	469,3	173,1	382,0	51,0
11	36,1	72,2	48,6	137	5,4	371,4	819,7	110	4,3	271,2	598,6	191,9	423,6	156,6	345,7	56,1
12	39,4	59,9	40,3	163	6,4	338,4	746,9	131	5,1	248,1	547,6	174,4	384,8	142,7	314,8	61,2
13	42,6	50,4	33,9	191	7,5	309,9	683,9	153	6,0	228,1	503,4	159,2	351,4	130,6	288,2	66,3
14	45,9	42,8	28,8	222	8,7	284,9	628,7	178	7,0	210,5	464,5	146,1	322,4	120,0	264,8	71,4
15	49,2	36,7	24,7	255	10,0	262,7	579,8	204	8,0	194,8	429,9	134,4	296,7	110,7	244,2	76,5
16	52,5	31,7	21,3	290	11,4	242,9	536,1	232	9,1	180,8	399,0	124,1	273,9	102,3	225,9	81,6
17	55,8	27,6	18,5	327	12,9	225,1	496,8	262	10,3	168,1	371,0	114,8	253,4	94,8	209,3	86,7
18	59,0	24,1	16,2	367	14,4	208,9	461,1	294	11,6	156,6	345,6	106,4	234,8	88,0	194,3	91,8
19	62,3	21,2	14,2	409	16,1	194,1	428,5	327	12,9	146,0	322,3	98,7	217,9	81,8	180,6	96,9
20	65,6	18,6	12,5	453	17,8	180,5	398,5	363	14,3	136,3	300,8	91,7	202,4	76,1	168,1	102
1 inch = 25,4 mm \| 1m = 3.28 ft \| 1 lbs = 0,453 kg

Tüv certification only valid for loading table above.
Loading figures are only valid for static loads.
Loading figures are only valid for single spans with supports at both ends.
All static systems, other than single spans, need an individual structural calculation. Please contact a structural engineer or Prolyte B.V. for assistance.
Loading figures are calculated according to and in full compliance with European standards (Eurocode).
The self-weight of the trusses is already taken into account.
Loading figures are only valid for the cross sectional orientation of the truss as shown by the icon in the loading table.
The interaction between bending moment and shear force at the connection point is already taken into account.
Truss spans can be assembled from different truss lengths.
Read the manual before assembling, using and loading the truss.